High Voltage Module Series HMR

 

 

News        Products        Applications        Company        Contact        Imprint

    Search     Deutsch

 

 

 

 

 

High Voltage Module Series HMR

 

 

 

HMR-230-(-9k/9k)-500, 10 Watt:

   

 

 

 

     Features / Options

      Typical Applications

 

 

 REMO_HSE_Module_HMR_np
Two high voltage outputs with -9 kV and +9 kV and an additional 325 VDC output with a total output current of 500A
Automatic load regulation (smooth characteristic)

  • Wide range input
  • Soft start
  • Two high voltage outputs with opposite polarity
  • Output voltage adjustable between ca. 8,7 kV and 9,7 kV
  • Additional 325 VDC output to operate a fan
  • In the case of flash-overs or over-current the unit will automatically adjust the output voltage
  • High voltage output 100 % short-circuit proof to ground
  • Smooth current- voltage characteristic
  • 99 mm wide, 68mm high, 193 mm deep (without fixing points)
  • Electrostatic Filter
  • Electrostatic Charging and Discharging
  • Etc.

 

 

 

 

 

 

 

 

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 




 

 

 

 

 

 

 

HMR-Series 30/60 /120 Watt with Single High Voltage Output:

 

 

 

 

      Features/ Options

     Typical Applications

 

 

REMO_HSE_Module_HMR_60
Parallelizable modules with one high voltage output up to 20 kV. Three high voltage values can permanently be pre-set and selected via a sliding switch

  • Wide range input with PFC
  • Soft start
  • Output voltages up to 20 kV
  • In the case of flash-overs or over-current the unit will automatically adjust the output voltage
  • High voltage output 100 % short-circuit proof to ground
  • Automatic over-temperature cutoff.
  • 110 mm wide, 63 mm high, 210 mm deep (without fixing points)
  • Electrostatic filter
  • Electrostatic charging and discharging
  • Etc.

 

 

 

 

 

 

 

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 


 

 

 

 

 

 

 

HMR-Series 30/60/120 Watt with Two High Voltage Outputs:

 

 

 

 

Features / Options

      Typical Applications

 

 

REMO_HSE_Modul_HMR_60_2
Parallelizable modules with two high voltage outputs such as 12 kV and 6 kV, switchable to 9 kV and 4.5 kV or 8 kV and 4kV

  • Wide range input with PFC
  • Soft start
  • Two outputs provide high voltages with a fixed ratio 
  • Output voltages up to 20 kV
  • In the case of flash-overs or over-current the unit will automatically adjust the output voltage
  • High voltage output 100 % short-circuit proof to ground
  • Automatic over-temperature cutoff.
  • 110 mm wide, 63 mm high, 210 mm deep (without fixing points)
  • Electrostatic filter
  • Electrostatic charging and discharging
  • Etc.

 

 

 

 

 

 

 

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 


 

 

Page back         Page forward         Top of page         Print this page         Privacy         Terms of Use

 

 

REMO-HSE Hochspannungselektronik GmbH, Straubinger Str. 28, D-94372 Rattiszell
Phone: +49(0)9964-6406-0 ▪ Fax: +49(0)9964-6406-20 ▪ Email: info@remo-hse.de