High Voltage Module Series MMR

 

 

News        Products        Applications        Company        Contact        Imprint

    Search     Deutsch

 

 

 

 

 

High Voltage Module Series MMR

 

 

 

    Description

     General Features / Options

     Typical Applications

 

 

  • Regulated modules designed for OEM applications
  • Different maximum voltage ratings from 500V to 120kV with positive or negative polarity
  • Output voltage and output current adjustable between 0% and 100% of the rated output values.
  • Models with  potentiometer and/ or analogue/digital interface
  • USB, RS232 or CAN 2.0 via external interface module available
  • Soft start
  • Automatic crossover from constant-voltage to constant-current regulation and vice versa.
  • Spark detection and monitoring
  • High voltage output 100 % short-circuit proof to ground
  • Potential free relay contacts and LEDs signal the status
  • Modules of the same ratings can be operated in parallel
  • Optional second high voltage output (fixed ratio as compared to first high voltage output e.g. 50% or 75%)
  • Electrostatic filters
  • Electrostatic charging and discharging
  • Capacitor charging systems
  • Ion getter pumps
  • Etc.

 

 




 

 

 

MMR Series 30 Watt with 24 VDC Input:

 

 

  • REMO-HSE 30W MMR High Voltage Modules30 Watt output power
  • Different maximum voltage ratings from 5kV to 30kV
  • 24 VDC input
  • MMR-S type: PLC control and monitoring via analogue interface
  • A 10V DC reference voltage is provided at the analogue interface connector
  • Potential-free relay contact for status messages
  • LEDs signal the status of output voltage, load and temperature

 

 

     Mechanical Dimensions:

 

 

      Up to 20kV output voltage:

86 mm wide, 60 mm high, 178 mm deep

 

      Up to 30kV output voltage:

86 mm (widewithout fixing points), 90 mm high, 178 mm deep

 

 

 

 

      Voltage Range:

 

 

 

      5 kV to 30 kV

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 


 

 

MMR Series 60 Watt / 120 Watt:

 

 

  • REMO-HSE 60/120W MMR High Voltage Modules60W or 120W output power
  • Different maximum voltage ratings from 500V to 70kV
  • Wide range input with PFC
  • Adjustable current-voltage characteristic
  • LEDs signal the status of output voltage, load and temperature
  • Potential-free relay contacts for status messages
  • Modules of the same ratings can be parallelized to increase the power range for bigger loads
  • MMR-P type: Potentiometers to adjust voltage and current. Three high voltage values can permanently be pre-set and selected via a sliding switch
  • MMR-S type: PLC control and monitoring via analogue interface
  • MMR-SP type: Potentiometer adjustment and PLC control/monitoring selectable via a sliding switch

 

 

      Mechanical Dimensions:

 

 

      Up to 20kV output voltage:

110 mm wide, 60 mm high, 210 mm deep

 

      Up to 40kV output voltage:

110 mm wide (without fixing points), 90 mm high, 210 mm deep

      Up to 70kV output voltage:

110 mm wide (without fixing points), 120 mm high, 210 mm deep

 

 

 

 

      Voltage Range:

 

 

 

      5 kV to 70 kV

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 

      500 V

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 


 

 

MMR Series 400 Watt:

 

 

  • REMO-HSE 400W MMR High Voltage Modules400W output power
  • Different maximum voltage ratings from 500V to 120kV
  • Wide range input with PFC
  • Adjustable current-voltage characteristic
  • LEDs signal the status of output voltage, load and temperature
  • Potential-free relay contacts for status messages
  • Modules of the same ratings can be parallelized to increase the power range for bigger loads
  • MMR-P type: Potentiometers to adjust voltage and current. Three high voltage values can permanently be pre-set and selected via a sliding switch
  • MMR-S type: PLC control and monitoring via analogue interface.
  • MMR-SP type: Potentiometer adjustment and PLC control/monitoring selectable via a sliding switch

 

 

      Mechanical Dimensions:

 

 

      Up to 60kV output voltage:

130 mm wide, 120 mm high (without fixing points), 300 mm deep

 

      Up to 120kV output voltage:

130 mm wide, 150 mm high (without fixing points), 300 mm deep

 

 

 

 

      Voltage Range:

 

 

 

      5 kV to 120 kV

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 

      500 V

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 


 

 

MMR Series 750 Watt:

 

 

  • REMO-HSE 750W MMR High Voltage Modules750W output power
  • Different maximum voltage ratings from 500V to 120kV
  • 230 VAC input with PFC
  • Adjustable current-voltage characteristic
  • LEDs signal the status of output voltage, load and temperature
  • Potential-free relay contacts for status messages
  • Modules of the same ratings can be parallelized to increase the power range for bigger loads
  • MMR-P type: Potentiometers to adjust voltage and current. Three high voltage values can permanently be pre-set and selected via a sliding switch
  • MMR-S type: PLC control and monitoring via analogue interface.
  • MMR-SP type: Potentiometer adjustment and PLC control/monitoring selectable via a sliding switch

 

 

      Mechanical Dimensions:

 

 

      Up to 60kV output voltage:

130 mm wide, 120 mm high (without fixing points), 300 mm deep

 

      Up to 120kV output voltage:

130 mm wide, 150 mm high (without fixing points), 300 mm deep

 

 

 

 

      Voltage Range:

 

 

 

      5 kV to 120 kV

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 

      500 V

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 


 

 

MMR Series 1000 Watt:

 

 

  • REMO-HSE 1000W MMR High Voltage Modules
    1000W output power
  • Different maximum voltage ratings from 500V to 120kV
  • 230 VAC input with PFC
  • Adjustable current-voltage characteristic
  • LEDs signal the status of output voltage, load and temperature
  • Potential-free relay contacts for status messages
  • Modules of the same ratings can be parallelized to increase the power range for bigger loads
  • MMR-P type: Potentiometers to adjust voltage and current. Three high voltage values can permanently be pre-set and selected via a sliding switch
  • MMR-S type: PLC control and monitoring via analogue interface.
  • MMR-SP type: Potentiometer adjustment and PLC control/monitoring selectable via a sliding switch

 

 

      Mechanical Dimensions:

 

 

      Up to kV output voltage:

    mm wide,  mm high (without fixing points),  mm deep

 

      Up to kV output voltage:

    mm wide,  mm high (without fixing points),  mm deep

 

 

 

 

      Voltage Range:

 

 

 

      5 kV to 120 kV

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 

     

Model Selection Table (HTML)          Datasheet (PDF)          Instructions (PDF)

 

 


 

 

Page back         Page forward         Top of page         Print this page         Privacy         Terms of Use

 

 

REMO-HSE Hochspannungselektronik GmbH, Straubinger Str. 28, D-94372 Rattiszell
Phone: +49(0)9964-6406-0 ▪ Fax: +49(0)9964-6406-20 ▪ Email: info@remo-hse.de