REMO-HSE high voltage modules - HMR series
HMR Series
High Voltage Modules
up to 120W and 15kV
or 10W with -9kV and 9kV

The first Generation

The HMR-Series 30/60/120 Watt was our first series of high voltage modules for electrostatic precipitators. We launched the first modules of this series at the end of the 1990s. Since there are still some new electrostatic precipitators being equipped with these modules the HMR series remains part of our product range as a high voltage module for certain precipitators.

The HMR-230-(-9k/9k)-500 is a very special low power version with two high voltage outputs of opposite polarity and an additional 325VDC output for connecting a fan.

HMR-Series 30/60/120 Watt with Single or double High Voltage Output

Features
  • Different voltage classes up to 15kV with one or two outputs
  • Model depending 30W, 60W or 120W
  • Wide range input with PFC
Controls and Monitoring
  • Voltage and current are adjustable via potentiometers within a certain range
  • Potential-free relay contacts signaling "Ready" and "Filter cleaning"
Special Features
  • Soft start
  • Spark sensing
  • Some models have three voltage setting potentiometers selectable via a sliding switch
Protection
  • Over-current cutoff
  • Over-current limitation
  • Thermal overload protection
  • High voltage output 100% short-circuit-proof to ground
  • In case of a spark, the module turns off for approximately one second and then ramps up automatically
Mechanical Data
  • Aluminum case
  • Approx. 1kg
  • Classification IP20
  • Cooling vents
Comment
If you are planning new products, we would recommend our current product series such as MSR and MMR instead of the HMR-Series 30/60/120 Watt.

HMR-230-(-9k/9k)-500 with additional 325VDC output for fan

Features
  • Two high voltage outputs with +9kV and -9kV and one 325VDC output
  • 500µA maximum total output current
  • Input Voltage from 115 to 230 V AC (-10%, +6%)
Controls
  • Output voltage can bet set between 8.7kV and 9.7kV via potentiometer
Special features
  • Soft start
  • Spark sensing
Protection
  • Automatic high voltage adjustment at overcurrent
  • Over-current limitation
  • Thermal overload protection
  • High voltage output 100% short-circuit-proof to ground
  • In case of a spark, the module turns off for approximately one second and then ramps up automatically
Mechanical Data
  • Aluminum case
  • Approx. 1kg
  • Classification IP20

Interested?

Then contact us without obligation. Click here to send email: